I'm converting 30 year old code and needed a string TAB function:
//tab function similar to TAB used in old BASIC languages
//though some of them did not truncate if the string were
//longer than the requested position
function tab($instring="",$topos=0){
if(strlen($instring)<$topos){
$result=str_pad($instring,$topos-1," ",STR_PAD_RIGHT);
}else{
$result=substr($instring,0,$topos-1);
}
return $result;
}
$pline="String with this tab to 50 and";
$tline=tab($pline,50)."finish it.";
echo $tline.PHP_EOL;
$pline="101010101020202020203030303030404040404050505050506060606060";
$tline=tab($pline,50)."finish it.";
echo $tline.PHP_EOL;
//Results in this output:
//String with this tab to 50 and finish it.
//1010101010202020202030303030304040404040505050505finish it.
Funções de String
Veja Também
Para funções de manipulação de string mais poderosas, veja as funções de expressões regulares estilo Perl. Para trabalhar com strings com codificação multibyte, veja as funções Multibyte String.
Índice
- addcslashes — Quote string with slashes in a C style
- addslashes — Adiciona barras a uma string
- bin2hex — Converte um dado binário em representação hexadecimal
- chop — Sinônimo de rtrim
- chr — Generate a single-byte string from a number
- chunk_split — Divide uma string em pedaços menores
- convert_cyr_string — Converte de um conjunto de caracteres cirílico para outro
- convert_uudecode — Decodifica uma string codificada com uuencode
- convert_uuencode — Codifica uma string com uuencode
- count_chars — Return information about characters used in a string
- crc32 — Calcula polinômio crc32 de uma string
- crypt — One-way string hashing
- echo — Output one or more strings
- explode — Split a string by a string
- fprintf — Escreve uma string formatada para um fluxo
- get_html_translation_table — Returns the translation table used by htmlspecialchars and htmlentities
- hebrev — Convert logical Hebrew text to visual text
- hebrevc — Convert logical Hebrew text to visual text with newline conversion
- hex2bin — Decodifica uma string binária codificada em hexadecimal
- html_entity_decode — Convert HTML entities to their corresponding characters
- htmlentities — Convert all applicable characters to HTML entities
- htmlspecialchars_decode — Convert special HTML entities back to characters
- htmlspecialchars — Convert special characters to HTML entities
- implode — Join array elements with a string
- join — Sinônimo de implode
- lcfirst — Torna minúsculo o primeiro caractere de uma string
- levenshtein — Calculate Levenshtein distance between two strings
- localeconv — Get numeric formatting information
- ltrim — Retira espaços em branco (ou outros caracteres) do início de uma string
- md5_file — Calculates the md5 hash of a given file
- md5 — Calculate the md5 hash of a string
- metaphone — Calculate the metaphone key of a string
- money_format — Formata um número como uma string de moeda
- nl_langinfo — Query language and locale information
- nl2br — Inserts HTML line breaks before all newlines in a string
- number_format — Format a number with grouped thousands
- ord — Converte o primeiro byte de uma string para um valor entre 0 e 255
- parse_str — Converte a string em variáveis
- print — Mostra uma string
- printf — Output a formatted string
- quoted_printable_decode — Converte uma string Quoted-Printable para uma string de 8 bits
- quoted_printable_encode — Converte uma string de 8 bits para uma string Quoted-Printable
- quotemeta — Quote meta characters
- rtrim — Retira espaço em branco (ou outros caracteres) do final de uma string
- setlocale — Set locale information
- sha1_file — Calcula a hash sha1 de um arquivo
- sha1 — Calculate the sha1 hash of a string
- similar_text — Calcula a similaridade entre duas strings
- soundex — Calcula a chave soundex de uma string
- sprintf — Return a formatted string
- sscanf — Interpreta a entrada de uma string de acordo com um formato
- str_contains — Determina se uma string contém uma substring fornecida
- str_decrement — Decrement an alphanumeric string
- str_ends_with — Verifica se uma string termina com uma substring fornecida
- str_getcsv — Analisa uma string CSV e retorna os dados em um array
- str_increment — Increment an alphanumeric string
- str_ireplace — Case-insensitive version of str_replace
- str_pad — Pad a string to a certain length with another string
- str_repeat — Repete uma string
- str_replace — Substitui todas as ocorrências da string de pesquisa com a string de substituição
- str_rot13 — Executa a transformação rot13 em uma string
- str_shuffle — Embaralha uma string aleatoriamente
- str_split — Convert a string to an array
- str_starts_with — Verifica se uma string começa com uma substring fornecida
- str_word_count — Retorna informação sobre palavras usadas em uma string
- strcasecmp — Binary safe case-insensitive string comparison
- strchr — Sinônimo de strstr
- strcmp — Binary safe string comparison
- strcoll — Locale based string comparison
- strcspn — Encontra o tamanho do segmento inicial que não corresponde à máscara
- strip_tags — Retira as tags HTML e PHP de uma string
- stripcslashes — Remove o escape de strings escapadas com addcslashes
- stripos — Find the position of the first occurrence of a case-insensitive substring in a string
- stripslashes — Desfaz os escapes de uma string escapada
- stristr — Case-insensitive strstr
- strlen — Retorna o tamanho de uma string
- strnatcasecmp — Comparação de strings insensível a maiúsculas/minúsculas usando o algoritmo de "ordem natural"
- strnatcmp — String comparisons using a "natural order" algorithm
- strncasecmp — Comparação binária de strings, insensível a maiúsculas/minúsculas, dos primeiros n caracteres
- strncmp — Binary safe string comparison of the first n characters
- strpbrk — Procura na string por um dos caracteres de um conjunto
- strpos — Find the position of the first occurrence of a substring in a string
- strrchr — Find the last occurrence of a character in a string
- strrev — Reverte uma string
- strripos — Find the position of the last occurrence of a case-insensitive substring in a string
- strrpos — Find the position of the last occurrence of a substring in a string
- strspn — Encontra o comprimento do segmento inicial de uma string composta totalmente de caracteres contidos em uma máscara informada
- strstr — Find the first occurrence of a string
- strtok — Tokenize string
- strtolower — Converte uma string para minúsculas
- strtoupper — Make a string uppercase
- strtr — Translate characters or replace substrings
- substr_compare — Comparação binária de duas strings a partir de uma posição até n caracteres
- substr_count — Conta o número de ocorrências de uma substring
- substr_replace — Substitui o texto dentro de uma parte de uma string
- substr — Retorna parte de uma string
- trim — Retira espaço (ou outros caracteres) do início e do final de uma string
- ucfirst — Make a string's first character uppercase
- ucwords — Converte para maiúsculas o primeiro caractere de cada palavra
- utf8_decode — Converts a string from UTF-8 to ISO-8859-1, replacing invalid or unrepresentable characters
- utf8_encode — Converts a string from ISO-8859-1 to UTF-8
- vfprintf — Escreve uma string formatada para um fluxo
- vprintf — Output a formatted string
- vsprintf — Return a formatted string
- wordwrap — Quebra uma string em um dado número de caracteres
add a note
User Contributed Notes 24 notes
lrirwin at alum dot wustl dot edu ¶
3 years ago
t0russ at gmail dot com ¶
19 years ago
to kristin at greenaple dot on dot ca:
thanx for sharing.
your function in recursive form proved to be slightly faster and it returns false (as it should) when the character is not found instead of number 0:
<?php
function strnposr($haystack, $needle, $occurance, $pos = 0) {
return ($occurance<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurance-1,strpos($haystack, $needle, $pos) + 1);
}
?>
kristin at greenapple dot on dot ca ¶
19 years ago
I really searched for a function that would do this as I've seen it in other languages but I couldn't find it here. This is particularily useful when combined with substr() to take the first part of a string up to a certain point.
strnpos() - Find the nth position of needle in haystack.
<?php
function strnpos($haystack, $needle, $occurance, $pos = 0) {
for ($i = 1; $i <= $occurance; $i++) {
$pos = strpos($haystack, $needle, $pos) + 1;
}
return $pos - 1;
}
?>
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
$root_dir = substr($haystack, 0, strnpos($haystack, $needle, 4));
echo $root_dir;
?>
Returns: /home/username/www
Use this example with the server variable $_SERVER['SCRIPT_NAME'] as the haystack and you can self-discover a document's root directory for the purposes of locating global files automatically!
admin at fivestarbuy dot com ¶
19 years ago
This example lets you parse an unparsed strings variables. Warning: This could cause security leaks if you allow users to pass $variables through this engine. I recommend only using this for your Content Management System.
<?
$mytime=time();
$mydog="My Dog Ate My PHP!";
# Your Parsing String:
$s1 = 'Hyphen Variable Preserving: $mytime, and $mydog';
echo "Before: <br><br>$s1<br><br>";
# Remember, wherever you define this, it will not be defined GLOBAL into the function
# which is why we define it here. Defining it global could lead to security issues.
$vardata=get_defined_vars();
# Parse the string
$s1 = StrParse($s1,$vardata);
echo "After: <br><br>$s1";
function StrParse($str,$vardata) {
# Takes a string, or piece of data, that contains PHP Variables
# For example, unparsed variables like: Test using time: $mytime
# This example shows $mytime, and not the actual variable value.
# The end result shows the actual variable value of $mytime.
# This is useful for building a content management system,
# and directing your variables into your content data,
# where content is stored in a file or database, unparsed.
# Of course this could slow down page loads, but it's a good way
# to parse data from current variables into your loaded new data
# making it compatible.
# Then the variables are replaced with the actual variable..
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
[tab!] ¶
20 years ago
//
// string strtrmvistl( string str, [int maxlen = 64],
// [bool right_justify = false],
// [string delimter = "<br>\n"])
//
// splits a long string into two chunks (a start and an end chunk)
// of a given maximum length and seperates them by a given delimeter.
// a second chunk can be right-justified within maxlen.
// may be used to 'spread' a string over two lines.
//
function strtrmvistl($str, $maxlen = 64, $right_justify = false, $delimter = "<br>\n") {
if(($len = strlen($str = chop($str))) > ($maxlen = max($maxlen, 12))) {
$newstr = substr($str, 0, $maxlen - 3);
if($len > ($maxlen - 3)) {
$endlen = min(($len - strlen($newstr)), $maxlen - 3);
$newstr .= "..." . $delimter;
if($right_justify)
$newstr .= str_pad('', $maxlen - $endlen - 3, ' ');
$newstr .= "..." . substr($str, $len - $endlen);
}
return($newstr);
}
return($str);
}
webmaster at cafe-clope dot net ¶
19 years ago
A comprehensive concatenation function, that works with array and strings
<?php
function str_cat() {
$args = func_get_args() ;
// Asserts that every array given as argument is $dim-size.
// Keys in arrays are stripped off.
// If no array is found, $dim stays unset.
foreach($args as $key => $arg) {
if(is_array($arg)) {
if(!isset($dim))
$dim = count($arg) ;
elseif($dim != count($arg))
return FALSE ;
$args[$key] = array_values($arg) ;
}
}
// Concatenation
if(isset($dim)) {
$result = array() ;
for($i=0;$i<$dim;$i++) {
$result[$i] = '' ;
foreach($args as $arg)
$result[$i] .= ( is_array($arg) ? $arg[$i] : $arg ) ;
}
return $result ;
} else {
return implode($args) ;
}
}
?>
A simple example :
<?php
str_cat(array(1,2,3), '-', array('foo' => 'foo', 'bar' => 'bar', 'noop' => 'noop')) ;
?>
will return :
Array (
[0] => 1-foo
[1] => 2-bar
[2] => 3-noop
)
More usefull :
<?php
$myget = $_GET ; // retrieving previous $_GET values
$myget['foo'] = 'b a r' ; // changing one value
$myget = str_cat(array_keys($myget), '=', array_map('rawurlencode', array_values($myget))) ;
$querystring = implode(ini_get('arg_separator.output'), $myget)) ;
?>
will return a valid querystring with some values changed.
Note that <?php str_cat('foo', '&', 'bar') ; ?> will return 'foo&bar', while <?php str_cat(array('foo'), '&', 'bar') ; ?> will return array(0 => foo&bar)
terry dot greenlaw at logicalshift dot com ¶
20 years ago
Here's a simpler "simplest" way to toggle through a set of 1..n colors for web backgrounds:
<?php
$colours = array('#000000', '#808080', '#A0A0A0', '#FFFFFF');
// Get a colour
$color = next($colors) or $color = reset($colors);
?>
The code doesn't need to know anything about the number of elements being cycled through. That way you won't have to tracking down all the code when changing the number of colors or the color values.
Anonymous ¶
19 years ago
In response to hackajar <matt> yahoo <trot> com,
No string-to-array function exists because it is not needed. If you reference a string with an offset like you do with an array, the character at that offset will be return. This is documented in section III.11's "Strings" article under the "String access and modification by character" heading.
str at maphpia dot com ¶
11 years ago
I was looking for a function to find the common substring in 2 different strings. I tried both the mb_string_intersect and string_intersect functions listed here but didn't work for me. I found the algorithm at http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP so here I post you the function
<?php
/**
* Finds the matching string between 2 strings
*
* @param string $string1
* @param string $string2
* @param number $minChars
*
* @return NULL|string
*
* @link http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP
*/
function string_intersect($string_1, $string_2)
{
$string_1_length = strlen($string_1);
$string_2_length = strlen($string_2);
$return = "";
if ($string_1_length === 0 || $string_2_length === 0) {
// No similarities
return $return;
}
$longest_common_subsequence = array();
// Initialize the CSL array to assume there are no similarities
for ($i = 0; $i < $string_1_length; $i++) {
$longest_common_subsequence[$i] = array();
for ($j = 0; $j < $string_2_length; $j++) {
$longest_common_subsequence[$i][$j] = 0;
}
}
$largest_size = 0;
for ($i = 0; $i < $string_1_length; $i++) {
for ($j = 0; $j < $string_2_length; $j++) {
// Check every combination of characters
if ($string_1[$i] === $string_2[$j]) {
// These are the same in both strings
if ($i === 0 || $j === 0) {
// It's the first character, so it's clearly only 1 character long
$longest_common_subsequence[$i][$j] = 1;
} else {
// It's one character longer than the string from the previous character
$longest_common_subsequence[$i][$j] = $longest_common_subsequence[$i - 1][$j - 1] + 1;
}
if ($longest_common_subsequence[$i][$j] > $largest_size) {
// Remember this as the largest
$largest_size = $longest_common_subsequence[$i][$j];
// Wipe any previous results
$return = "";
// And then fall through to remember this new value
}
if ($longest_common_subsequence[$i][$j] === $largest_size) {
// Remember the largest string(s)
$return = substr($string_1, $i - $largest_size + 1, $largest_size);
}
}
// Else, $CSL should be set to 0, which it was already initialized to
}
}
// Return the list of matches
return $return;
}
admin at rotarymulundeast dot org ¶
18 years ago
Here's an easier way to find nth...
function nth($numbex){
if ($numbex%10 == 1 && $numbex%100 != 11) $sth='st';
elseif ($numbex%10 == 2 && $numbex%100 != 12) $sth='nd';
elseif ($numbex%10 == 3 && $numbex%100 != 13) $sth='rd';
else $sth = 'th';
return $sth;
}
there is is no need to check if the user has entered a non-integer as we may be using this function for expressing variables as well eg. ith value of x , nth root of z ,etc...
james dot d dot baker at gmail dot com ¶
19 years ago
<?php
/*
Written By James Baker, May 27th 2005
sentenceCase($string);
$string: The string to convert to sentence case.
Converts a string into proper sentence case (First letter of each sentance capital, all the others smaller)
Example Usage:
echo sentenceCase("HELLO WORLD!!! THIS IS A CAPITALISED SENTENCE. this isn't.");
Returns:
Hello world!!! This is a capitalised sentence. This isn't.
*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
navarr at gmail dot com ¶
18 years ago
stripos for PHP4.x
<?php
function stripos($haystack,$needle) {
return strpos(strtoupper($haystack),strtoupper($needle));
}
?>
SteveRusin ¶
18 years ago
The functions below:
function beginsWith( $str, $sub )
function endsWith( $str, $sub )
Are correct, but flawed. You'd need to use the === operator instead:
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) === $sub );
}
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) === $sub );
}
Otherwise, endsWith would return "foobar.0" ends with ".0" as well as "0" or "00" or any amount of zeros because numerically .0 does equal 0.
Anonymous ¶
19 years ago
to: james dot d dot baker at gmail dot com
PHP has a builtin function for doing what your function does,
http://php.net/ucfirst
http://php.net/ucwords
Verdauga ¶
16 years ago
Just a note in regards to bloopletech a few posts down:
The word "and" should not be used when converting numbers to text. "And" (at least in US English) should only be used to indicate the decimal place.
Example:
1,796,706 => one million, seven hundred ninety-six thousand, seven hundred six.
594,359.34 => five hundred ninety four thousand, three hundred fifty nine and thirty four hundredths
andy a t onesandzeros d o t biz ¶
20 years ago
I use these little doo-dads quite a bit. I just thought I'd share them and maybe save someone a little time. No biggy. :)
// returns true if $str begins with $sub
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) == $sub );
}
// return tru if $str ends with $sub
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) == $sub );
}
// trims off x chars from the front of a string
// or the matching string in $off is trimmed off
function trimOffFront( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, $off );
else
return substr( $str, strlen( $off ) );
}
// trims off x chars from the end of a string
// or the matching string in $off is trimmed off
function trimOffEnd( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, 0, strlen( $str ) - $off );
else
return substr( $str, 0, strlen( $str ) - strlen( $off ) );
}
mike "eyes" moe ¶
17 years ago
Here is a truly random string generator it uses the most common string functions it will work on anywhere.
<?php
function random_string($max = 20){
$chars = explode(" ", "a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9");
for($i = 0; $i < $max; $i++){
$rnd = array_rand($chars);
$rtn .= base64_encode(md5($chars[$rnd]));
}
return substr(str_shuffle(strtolower($rtn)), 0, $max);
}
?>
m ¶
17 years ago
Regarding the code for the function beginsWith($str, $sub), I found that it has problems when only one character is present after the string searched for. I found that this works better instead:
<?php
function beginsWith($str, $sub) {
return (strncmp($str, $sub, strlen($sub)) == 0);
}
?>
Stephen Dewey ¶
16 years ago
If you want a function to return all text in a string up to the Nth occurrence of a substring, try the below function.
Works in PHP >= 5.
(Pommef provided another sample function for this purpose below, but I believe it is incorrect.)
<?php
// Returns all of $haystack up to (but excluding) the $n_occurrence occurrence of $needle. Therefore:
// If there are < $n_occurrence occurrences of $needle in $haystack, the entire string will be returned.
// If there are >= $n_occurrence occurrences of $needle in $haystack, the returned string will end before the $n_occurrence'th needle.
// This function only makes sense for $n_occurrence >= 1
function nsubstr($needle, $haystack, $n_occurrence)
{
// After exploding by $needle, every entry in $arr except (possibly) part of the last entry should have its content returned.
$arr = explode($needle,$haystack,$n_occurrence);
// Examine last entry in $arr. If it contains $needle, cut out all text except for the text before $needle.
$last = count($arr) - 1;
$pos_in_last = strpos($arr[$last],$needle);
if ($pos_in_last !== false)
$arr[$last] = substr($arr[$last],0,$pos_in_last);
return implode($needle,$arr);
}
$string = 'd24jkdslgjldk2424jgklsjg24jskgldjk24';
print 'S: ' . $string . '<br>';
print '1: ' . nsubstr('24',$string,1) . '<br>';
print '2: ' . nsubstr('24',$string,2) . '<br>';
print '3: ' . nsubstr('24',$string,3) . '<br>';
print '4: ' . nsubstr('24',$string,4) . '<br>';
print '5: ' . nsubstr('24',$string,5) . '<br>';
print '6: ' . nsubstr('24',$string,6) . '<br>';
print '7: ' . nsubstr('24',$string,7) . '<br>';
/*
// prints:
S: d24jkdslgjldk2424jgklsjg24jskgldjk24
1: d
2: d24jkdslgjldk
3: d24jkdslgjldk24
4: d24jkdslgjldk2424jgklsjg
5: d24jkdslgjldk2424jgklsjg24jskgldjk
6: d24jkdslgjldk2424jgklsjg24jskgldjk24
7: d24jkdslgjldk2424jgklsjg24jskgldjk24
*/
?>
Note that this function can be combined with wordwrap() to accomplish a routine but fairly difficult web design goal, namely, limiting inline HTML text to a certain number of lines. wordwrap() can break your string using <br>, and then you can use this function to only return text up to the N'th <br>.
You will still have to make a conservative guess of the max number of characters per line with wordwrap(), but you can be more precise than if you were simply truncating a multiple-line string with substr().
See example:
<?php
$text = 'Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida accumsan, enim quam condimentum est, vitae rutrum neque magna ac enim.';
$wrapped_text = wordwrap($text,100,'<br>',true);
$three_lines = nsubstr('<br>',$wrapped_text,3);
print '<br><br>' . $three_lines;
$four_lines = nsubstr('<br>',$wrapped_text,4);
print '<br><br>' . $four_lines;
/*
prints:
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida
*/
?>
administrador(ensaimada)sphoera(punt)com ¶
18 years ago
I've prepared this simple function to obtain a string delimited between tags (not only XML tags!). Anybody needs something like this?.
<?php
function get_string_between($string, $start, $end){
$string = " ".$string;
$ini = strpos($string,$start);
if ($ini == 0) return "";
$ini += strlen($start);
$len = strpos($string,$end,$ini) - $ini;
return substr($string,$ini,$len);
}
$string = "this [custom] function is useless!!";
echo get_string_between($string,"[","]");
// must return "custom";
?>
more functions at http://www.sphoera.com
rh at richardhoward dot net ¶
19 years ago
<?php
/**
Utility class: static methods for cleaning & escaping untrusted (i.e.
user-supplied) strings.
Any string can (usually) be thought of as being in one of these 'modes':
pure = what the user actually typed / what you want to see on the page /
what is actually stored in the DB
gpc = incoming GET, POST or COOKIE data
sql = escaped for passing safely to RDBMS via SQL (also, data from DB
queries and file reads if you have magic_quotes_runtime on--which
is rare)
html = safe for html display (htmlentities applied)
Always knowing what mode your string is in--using these methods to
convert between modes--will prevent SQL injection and cross-site scripting.
This class refers to its own namespace (so it can work in PHP 4--there is no
self keyword until PHP 5). Do not change the name of the class w/o changing
all the internal references.
Example usage: a POST value that you want to query with:
$username = Str::gpc2sql($_POST['username']);
*/
//This sets SQL escaping to use slashes; for Sybase(/MSSQL)-style escaping
// ( ' --> '' ), set to true.
define('STR_SYBASE', false);
class Str {
function gpc2sql($gpc, $maxLength = false)
{
return Str::pure2sql(Str::gpc2pure($gpc), $maxLength);
}
function gpc2html($gpc, $maxLength = false)
{
return Str::pure2html(Str::gpc2pure($gpc), $maxLength);
}
function gpc2pure($gpc)
{
if (ini_get('magic_quotes_sybase'))
$pure = str_replace("''", "'", $gpc);
else $pure = get_magic_quotes_gpc() ? stripslashes($gpc) : $gpc;
return $pure;
}
function html2pure($html)
{
return html_entity_decode($html);
}
function html2sql($html, $maxLength = false)
{
return Str::pure2sql(Str::html2pure($html), $maxLength);
}
function pure2html($pure, $maxLength = false)
{
return $maxLength ? htmlentities(substr($pure, 0, $maxLength))
: htmlentities($pure);
}
function pure2sql($pure, $maxLength = false)
{
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return (STR_SYBASE)
? str_replace("'", "''", $pure)
: addslashes($pure);
}
function sql2html($sql, $maxLength = false)
{
$pure = Str::sql2pure($sql);
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return Str::pure2html($pure);
}
function sql2pure($sql)
{
return (STR_SYBASE)
? str_replace("''", "'", $sql)
: stripslashes($sql);
}
}
?>
php at moechofe dot com ¶
19 years ago
<?php
/*
* str_match
*
* return a string with only cacacteres defined in a expression return false if the expression is not valid
*
* @param $str string the string
* @param $match the expression based on the class definition off a PCRE regular expression.
* the '[', ']', '\' and '^' at class start need to be escaped.
* like : -a-z0-9_@.
*/
function str_match( $str, $match )
{
$return = '';
if( eregi( '(.*)', $match, $class ) )
{
$match = '['.$regs[1].']';
for( $i=0; $i<strlen($str); $i++ )
if( ereg( '['.$class[1].']', $str[$i] ) )
$return .= $str{$i};
return $return;
}
else return false;
}
/*
* example
* accept only alphanum caracteres from the GET/POST parameters 'a'
*/
if( ! empty($_REQUEST['a']) )
$_REQUEST['a'] = str_match( $_REQUEST['a'], 'a-zA-Z0-9' );
else
$_REQUEST['a'] = 'default';
?>
Pommef ¶
19 years ago
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
function strnpos($haystack, $needle, $occurance, $pos = 0) {
$res = implode($needle,$haystack);
$res = array_slice($res, $pos, $occurance);
return explode ($needle,$res);
}
?>
Tomek Rychtyk ¶
12 years ago
Get the intersection of two strings using array_intersect
<?php
function string_intersect($string1, $string2)
{
$array1 = $array2 = array();
for($i = 0, $j = 0, $s1_len = strlen($string1), $s2_len = strlen($string2);($i < $s1_len) || ($j < $s2_len); $i++, $j++) {
if($i < $s1_len) {
$array1[] = $string1[$i];
}
if($j < $s2_len) {
$array2[] = $string2[$j];
}
}
return implode('', array_intersect($array1, $array2));
}
?>
For more advanced comparison you can use array_uintersect as well.
